Enable/Disable Wifi on Mimo Login Station TabletFollow
If your Mimo login station tablet has a message Web page unavailable, the login station no longer connects to the webpage likely because the tablet has lost its network connection.
To reconnect the Mimo tablet to the network to resolve this issue power-cycle the tablet, If it does not automatically reconnect on boot up, please follow the instructions below to reconnect.
If it doesn't reconnect after the power cycle then do the following:
>Place your thumb on the upper right-hand corner of the touch screen for 6 to 7 seconds
>enter 7300 for the passcode
>Press the Home Symbol at the upper right-hand corner
>Click the Gear to go into the settings page
>Select Wi-Fi and select disable and re-enable
Once disabled and enabled the tablet should connect to the Spindle_Subnet
Article is closed for comments.