Verify and reconnect Mimo Tablet to Spindle Subnet
FollowVerify Tablet is connected to the Spindle Subnet
In the upper right corner of the screen press and hold on the very edge of the screen
You will then see the box shown below appear on screen. Enter the password 7300
On the next page click on the house or Home button
Click the Gear to go into the settings page
Once in the settings page click on Wifi and verify on the right that the device is connected to the Spindle Subnet.
If the device is not showing connected, then you will need to forget the network for Spindle_Subnet follow the below instructions to reconnect it to the Spindle Subnet
Connecting to Spindle Access Point
Scroll up and Select *Wi-Fi* , To add New Network SSID Select (+)
Enter “Spindle_Subnet”
** Note: The Spindle_Subnet is a hidden SSID so you will not see it in the list of available networks. **
Select *None* to specify security type
Select *None* to specify security type
Select Security Type *WPA/WPA2 PSK*
Enter Password “Sp1ndleN3t”
Select *Show password* to verify it has been entered correctly
Then select *Save*
From this point once connected you should be able to power cycle the device and it will reconnect to the Spindle Subnet and then auto start the browser service.
Comments
0 comments
Article is closed for comments.